Towards scalable and degradable bioplastic films from Moringa oleifera gum/poly(vinyl alcohol) as packaging material.

The use of plant gum-based biodegradable bioplastic films as a packaging material is limited due to their poor physicochemical properties. However, combining plant gum with synthetic degradable polymer and some additives can improve these properties. Keeping in view, the present study aimed to synthesize a series of bioplastic films using Moringa oleifera gum, polyvinyl alcohol, glycerol, and citric acid via thermal treatment followed by a solution casting method. The films were characterized using analytical techniques such as FTIR, XRD, SEM, AFM, TGA, and DSC. The study examined properties such as water sensitivity, gas barrier attributes, tensile strength, the shelf life of food, and biodegradability. The films containing higher citric acid amounts showed appreciable %elongation without compromising tensile strength, good oxygen barrier properties, and biodegradation rates (>95%). Varying the amounts of glycerol and citric acid in the films broadened their physicochemical properties ranging from hydrophilicity to hydrophobicity and rigidity to flexibility. As all the films were synthesized using economical and environmentally safe materials, and showed better physicochemical and barrier properties, this study suggests that these bioplastic films can prove to be a potential alternative for various packaging applications.

A two-in-one thiosemicarbazide and whole pine needle-based adsorbent for rapid and efficient adsorption of methylene blue dye and mercuric ions.

Herein, we report the synthesis of an oxidized pine needle-thiosemicarbazone Schiff base (OPN-TSC) from whole pine needles (WPN) as a dual-purpose adsorbent to remove a cationic dye, methylene blue (MB), and Hg2+ ions in separate processes. The adsorbent was synthesized by periodate oxidation of WPN followed by a reaction with thiosemicarbazide. The syntheses of OPN and OPN-TSC were confirmed by FTIR, XRD, FESEM, EDS, BET, and surface charge analysis. The emergence of new peaks at 1729 cm-1 (-CHO stretching) and 1639 cm-1 (-COO- stretching) in the FTIR spectrum of OPN confirmed the oxidation of WPN to OPN. FTIR spectrum of OPN-TSC has a peak at 1604 cm-1 (C = N stretching), confirming the functionalization of OPN to OPN-TSC. XRD studies revealed an increase in the crystallinity of OPN and a decrease in the crystallinity of OPN-TSC because of the attachment of thiosemicarbazide to OPN. The values of %removal for MB and Hg2+ ions by OPN-TSC were found to be 87.36% and 98.2% with maximum adsorption capacity of 279.3 mg/g and 196 mg/g for MB and Hg2+ ions, respectively. The adsorption of MB followed pseudo-second-order kinetics with correlation coefficient (R2 of 0.99383) and Freundlich isotherm (R2 = 0.97239), whereas Hg2+ ion removal demonstrated the Elovich (R2 = 0.97076) and Langmuir isotherm (R2 = 0.95110). OPN-TSC is regenerable with significant recyclability up to 10 cycles for both the adsorbates. The studies established OPN-TSC as a low-cost, sustainable, biodegradable, environmentally benign, and promising adsorbent for the removal of hazardous cationic dyes and toxic metal ions from wastewater and industrial effluents, especially the textile effluents.

KMnO4-oxidized whole pine needle based adsorbent for selective and efficient removal of cationic dyes.

In the present study, we report the chemical modification of the dried and fallen pine needles (PNs) via a simple protocol using KMnO4 oxidation. The oxidized PNs (OPNs) were evaluated as adsorbents using some cationic and anionic dyes. The successful synthesis of OPNs adsorbent was characterized by various techniques to ascertain its structural attributes. The adsorbent showed selectivity for the cationic dyes with 96.11% removal (Pr) for malachite green (MG) and 89.68% Pr for methylene blue (MB) in 120 min. Kinetic models namely, pseudo-first order, pseudo-second order, and Elovich were applied to have insight into adsorption. Additionally, three adsorption isotherms, i.e., Langmuir, Freundlich, and Temkin were also applied. The dye adsorption followed a pseudo-second-order kinetic model with R2 > 0.99912 for MG and R2 > 0.9998 for MB. The adsorbent followed the Langmuir model with a maximum adsorption capacity (qm) of 223.2 mg/g and 156.9 mg/g for MG and MB, respectively. Furthermore, the OPNs showed remarkable regeneration and recyclability up to nine adsorption-desorption cycles with appreciable adsorption for both the dyes. The use of OPNs as an adsorbent for the removal of dyes from wastewater, therefore, provides an ecologically benign, low-cost, and sustainable solution.

We have carried out the chemical modification of the dried and fallen pine needles (PNs) via a simple protocol using KMnO₄ oxidation. The oxidized PNs (OPNs) were evaluated as adsorbents using some cationic and anionic dyes and the adsorbent showed selectivity for the cationic dyes. As far as the authors are aware, no such report has been documented in the literature wherein an adsorbent based on oxidized PNs with a simple protocol has been used for dye removal.

Functionalized Moringa oleifera Gum as pH-Responsive Nanogel for Doxorubicin Delivery: Synthesis, Kinetic Modelling and In Vitro Cytotoxicity Study

Environment-responsive-cum-site-specific delivery of therapeutic drugs into tumor cells is a foremost challenge for chemotherapy. In the present work, Moringa oleifera gum-based pH-responsive nanogel (MOGN) was functionalized as a doxorubicin (DOX) carrier. It was synthesized via free radical polymerization through the γ-irradiation method using acrylamide and N,N'-MBA followed by hydrolysis, sonication, and ultracentrifugation. The swelling behavior of MOGN as a function of pH was assessed using a gravimetric method that revealed its superabsorbent nature (365.0 g/g). Furthermore, MOGN showed a very high loading efficiency (98.35 %L) of DOX by MOGN. In vitro release studies revealed that DOX release from DOX-loaded MOGN was 91.92% at pH 5.5 and 12.18% at 7.4 pH, thus favorable to the tumor environment. The drug release from nanogel followed Korsmeyer-Peppas model at pH 5.5 and 6.8 and the Higuchi model at pH 7.4. Later, the efficient DOX release at the tumor site was also investigated by cytotoxicity study using Rhabdomyosarcoma cells. Thus, the synthesized nanogel having high drug loading capacity and excellent pH-triggered disintegration and DOX release performance in a simulated tumor environment could be a promising candidate drug delivery system for the targeted and controlled release of anticancer drugs.

Improving activity and stabilization of urease by crosslinking to nanoaggregate forms for herbicide degradation.

Bioremediation is the most effective green protocol for degradation of environmental contaminants. Present study involves carrier free urease immobilization with synthesis of its new crosslinked aggregates using two different crosslinkers, divinyl benzene (DVB) and tripropyleneglycol dimethacrylate (TPGDA) via free radical mechanism. Resulting crosslinked ureases were further converted to nanoform (CLUNAs) using solvent evaporation technique. The activity of free and the crosslinked ureases was studied as a function of operational parameters viz. temperature (20-80), pH (2-11) and substrate concentration (5-20 mM) using urea as substrate at contact time of 10 min. Storability study of the pristine urease and CLUNAs was carried out for 40 days, and the CLUNAs were reused in 10 repeat cycles to assess their reusability. Isoproturone degradation was studied under the above-cited range of pH and temperature and results were recorded after 24 h.

New Nanoaggregates of Crosslinked Laccase for Reactive Red Bioremediation.

Environmental concerns have led to an increased interest in developing green technologies for bioremediation of wastewater pollutants. In view of this, laccases have emerged as attractive green catalysts due to their applicability in oxidizing broad range of substrates. In the present work laccase was extracted from Coriolus versicolor (MTCC 138) and stabilized by formation of new crosslinked laccase nanoaggregates (CLNAs) using two different crosslinkers-N,N-methylenebisacrylamide (N, N-MBAAm) and ethyleneglycol dimethacrylate (EGDMA). Evaluation of laccase activity profile of the free as well as the well characterized CLNAs was carried out, and these were used in reactive red (RR) bioremediation. The CLNAs showed enriched catalytic activity at different temperatures and pH than the free laccase, good reusability when studied up to six cycles, and thermal and storage stability. CLNAs exhibited good bioremediation ability, which was enhanced in the presence of 1-hydroxybenzo triazole (HBT), a laccase mediator.

Enhanced catalytic activity of new acryloyl crosslinked cellulose dialdehyde-nitrilase Schiff base and its reduced form for nitrile hydrolysis.

Immobilization of enzymes to improve their catalytic properties is an attractive protocol which makes them suitable candidates to meet various industrial demands. Present study describes the synthesis of new acryloyl crosslinked cellulose dialdehyde (ACCD) for nitrilase immobilization. Nitrilase was immobilized onto ACCD via Schiff base formation i.e. imine linkages (-CH=N-). Effect of different operational parameters viz. temperature, pH and substrate concentration on the free and the immobilized nitrilases were evaluated by hydrolysis of mandelonitrile. Immobilization resulted into enhanced catalytic activity of nitrilase under different operating conditions of temperature and pH. The optimum temperature and pH for immobilized forms of nitrilase was obtained to be 55 °C and 8.0 which was higher than its free form (40 °C, 6.0). Immobilized nitrilase also exhibited good thermal and storage stability over the free form and is reusable up to sixteen repeat cycles with an appreciable retention activity.

New glucose oxidase-immobilized stimuli-responsive dextran nanoparticles for insulin delivery.

Designing strategies for the use of biopolymer-based nanoparticles as drug delivery carriers is a considerable challenge in pharmaceutical science. Present study reports synthesis of a novel glucose responsive and in-vitro pH triggered insulin delivery system comprised of glucose oxidase immobilized on acryloyl crosslinked dextran dialdehyde (ACDD) nanoparticles. Scanning electron microscopy, transmission electron microscopy and particle size analysis data revealed that these carriers possess nanosize which is an important parameter for drug delivery applications. In-vitro insulin release studies were performed under artificial gastric fluid (AGF, pH 1.2) and artificial intestinal fluid conditions (AIF, pH 7.4) at physiological temperature (37 °C). Insulin release profile showed controlled release of about 70% under AIF conditions for 24 h. Insulin release mechanism studied using different kinetic models revealed that Korsmeyer-Peppas model appropriately explained the mechanism as 'non-Fickian' diffusion release of insulin. These glucose responsive stimuli sensitive nanocarriers exhibited controlled release of about 90% under AIF conditions in the presence of glucose. These findings revealed that these nanoparticles are promising and reliable delivery systems to overcome problems related with subcutaneous insulin therapy.

Synthesis of a PEGylated Dopamine Ester with Enhanced Antibacterial and Antifungal Activity.

Drug-polymer conjugation is a simple and efficient approach to synthesizing new, effective, and potent antimicrobial agents to counter the problem of microbial resistance. In the present study, a PEGylated dopamine ester (PDE) was synthesized using the PEGylation process and synthesis of PDE was confirmed by Fourier-transform infrared spectroscopy, elemental analysis (CHNS-O), and atomic force microscopy techniques. Later, the antimicrobial activity of PDE was assessed against four strains of bacteria (Bacillus subtilis, Staphylococcus aureus, Pseudomonas aeruginosa, and Proteus vulgaris; Gram (-)) and two fungi (Aspergillus niger and Aspergillus fumigatus) by the agar well diffusion method. The minimum inhibitory concentration (MIC) of PDE was also determined by the broth dilution method against bacteria. PDE showed significant zones of inhibition ranged from 21 to 27 mm for bacteria and 16 to 20 mm for fungi under study, which were much higher than those for dopamine hydrochloride. MIC values of PDE showed its potential antimicrobial property.